Search
All Categories
    Menu Close

    Kemsol Multi-Phase 5L

    Highly efficient twin-chain quaternary cationic germicide for a true odour neutralising agent. Lingering odours from toilet/shower areas, camp grounds, ablution blocks and exterior food waste environments are neutralised, disinfected and refreshed in one step. Useful as a cleaning agent, particularly for solvent sensitive surfaces such as tar-seal and asphalt.
    SKU: HL893
    $42.84
    i h

    Multi-Phase

    Cleaner, Disinfectant, Deodoriser & Reodoriser

    Highly efficient twin-chain quaternary cationic germicide for a true odour neutralising agent. Lingering odours from toilet/shower areas, camp grounds, ablution blocks and exterior food waste environments are neutralised, disinfected and refreshed in one step. Useful as a cleaning agent, particularly for solvent sensitive surfaces such as tar-seal and asphalt.

    Directions

     

    For General Hard Surfaces dilute at 1:50 (2% soln, 20mls per ltr).

    For Floors dilute at 1:100 (1% soln, 10ml per ltr).

    For Heavy Duty Cleaning or Mould dilute at 1:20 (5% soln, 50mls per ltr), all with potable warm or cold water.

    May be used stronger or weaker, depending on the severity of the odour situation, or level of cleaning required. Surfaces may be rinsed with fresh water, or allowed to air-dry.

     

    Good Practice

     

    Under Good Practice Protocol diluted solution of this product as stated provides general biostasis using internationally recognised antibacterial agents with a recommended minimum contact time of 10 minutes. At 1% concentration this product provides 400PPM QAC.

    *
    *
    *

    Multi-Phase

    Cleaner, Disinfectant, Deodoriser & Reodoriser

    Highly efficient twin-chain quaternary cationic germicide for a true odour neutralising agent. Lingering odours from toilet/shower areas, camp grounds, ablution blocks and exterior food waste environments are neutralised, disinfected and refreshed in one step. Useful as a cleaning agent, particularly for solvent sensitive surfaces such as tar-seal and asphalt.

    Directions

     

    For General Hard Surfaces dilute at 1:50 (2% soln, 20mls per ltr).

    For Floors dilute at 1:100 (1% soln, 10ml per ltr).

    For Heavy Duty Cleaning or Mould dilute at 1:20 (5% soln, 50mls per ltr), all with potable warm or cold water.

    May be used stronger or weaker, depending on the severity of the odour situation, or level of cleaning required. Surfaces may be rinsed with fresh water, or allowed to air-dry.

     

    Good Practice

     

    Under Good Practice Protocol diluted solution of this product as stated provides general biostasis using internationally recognised antibacterial agents with a recommended minimum contact time of 10 minutes. At 1% concentration this product provides 400PPM QAC.